Pressure Ratchets and Pull Ratchets

Pressure Ratchets and Pull Ratchets

The simplest means of securing your load for transport is to use pressure ratchets or pull ratchets with the specially designed lashing strap. Push or pull ratchets (ERGO) are the most important thing when securing loads; they act as the tensioning element between the load and the lashing strap. Our ratchets reach a breaking load of 8 kN up to 100 kN and are all tested according to DIN EN 12195-2. It should be noted that the pretensioning force STF (Standard Tension Force) of the system varies depending on the lashing strap used in a straight pull. With us you will find the right push or pull ratchet as well as the right hooks and end fittings for every application.

Article nrImageNameProduct-TypeWebbing widthMaterialFinishingBreaking Strength (BS)STF-valueStockSummaryDescriptionhf:att:pa_produkt-typhf:att:pa_gurtbreitehf:att:pa_materialhf:att:pa_oberflaechehf:att:pa_vorspannkraft-bereich
71AQ008
Pressure Ratchet 25mm - 8kN
Pressure Ratchet 25mm - 8kNPressure Ratchet25 mmHigh tensile steelBlue Chromated – KOsil8.0 kN (800 daN)50 daN

Usually ready for shipment in 1 to 3 working days.

Our smallest pressure ratchet for a 25mm wide webbing, universally applicable for lighter loads.

With an LC of 400 daN in straight pull, this Hobby ratchet is one of the smallest in our range. With a strap width of 25 mm, different loads can be secured. The 71AQ008 is a pressure ratchet without lever safety device, the tensioning movement during load securing always goes in the direction of the loose end. All our 25mm Pressure Ratchets with a Breaking Strength of 8kN: druckratschen25-mmhochfester-stahlblau-verzinkt-kosil40-100-dan
71ASQ008
Pressure Ratchet 25mm - 8kN (bicolor)
Pressure Ratchet 25mm - 8kN (bicolor)Pressure Ratchet25 mmHigh tensile steelRAL colour8.0 kN (800 daN)50 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet for 25 mm webbing, without Lever lock.
RAL9005 (black)

This black (black/silver) Hobby ratchet with an LC of 400 daN in straight pull is one of the smallest in our range. This is used with a 25 mm wide webbing.

All our 25mm Pressure Ratchets with a Breaking Strength of 8kN:

druckratschen25-mmhochfester-stahlral-farbe40-100-dan
71AX008
Pressure Ratchet 25mm - 8kN (Inox)
Pressure Ratchet 25mm - 8kN (Inox)Pressure Ratchet25 mmInox8.0 kN (800 daN)50 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet / Hobby ratchet for 25 mm Lashing straps.

With an LC of 400 daN in straight pull, this stainless steel Hobby ratchet is one of the smallest in our range. With a strap width of 25 mm, different loads can be secured.

All our 25mm Pressure Ratchets with a Breaking Strength of 8kN:

druckratschen25-mmedelstahl40-100-dan
71AQ015
25mm-Druckratsche-stahl
Pressure Ratchet 25mm - 15kNPressure Ratchet25 mmHigh tensile steelBlue Chromated15 kN (1,500 daN)210 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet for 25 mm Lashing.
Handgrip: steel, wide version

druckratschen25-mmhochfester-stahlblau-verzinkt101-250-dan
71AX015
Pressure Ratchet 25mm - 15kN (Inox)
Pressure Ratchet 25mm - 15kN (Inox)Pressure Ratchet25 mmInox15 kN (1,500 daN)75 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet for 25 mm Lashing.
Handgrip: wide, Inox

Load securing with ease and precision!
Our article number 71AX015 is a first-class 25 mm stainless steel (inox) pressure ratchet – your reliable solution for safe transport.
With a breaking load of 15 kN, this small but powerful ratchet offers maximum safety.

The wide handle ensures comfortable handling, while the stainless steel construction stands for robustness and durability.
This pressure ratchet is ideal for securing loads firmly and reliably, whether for commercial transport or private use.

You can rely on the highest quality and efficiency.

druckratschen25-mmedelstahl40-100-dan
71BX015
Pressure Ratchet 35mm - 15kN (Inox)
Pressure Ratchet 35mm - 15kN (Inox)Pressure Ratchet35 mmInox15 kN (1,500 daN)75 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet for 35 mm Lashing.
Handgrip: wide, Inox

druckratschen35-mmedelstahl40-100-dan
71BQ020
Pressure Ratchet 35mm - 20kN (137mm)
Pressure Ratchet 35mm - 20kN (137mm)Pressure Ratchet35 mmHigh tensile steelBlue Chromated – KOsil20 kN (2,000 daN)120 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet for 35 mm Lashing.
Handgrip: wide, steel

druckratschen35-mmhochfester-stahlblau-verzinkt-kosil101-250-dan
71BQ031
Pressure Ratchet 35mm - 30kN
Pressure Ratchet 35mm - 30kNPressure Ratchet35 mmHigh tensile steelBlue Chromated30 kN (3,000 daN)270 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet with Lever lock for 35 mm webbing.

druckratschen35-mmhochfester-stahlblau-verzinkt251-450-dan
71BQ030
Pressure Ratchet 35mm - 30kN (Plastic Handgrip)
Pressure Ratchet 35mm - 30kN (Plastic Handgrip)Pressure Ratchet35 mmHigh tensile steelBlue Chromated30 kN (3,000 daN)270 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet with Lever lock for 35 mm webbing.
Handgrip: narrow, steel

Our 35mm pressure ratchet is often used to secure loads in a van, car or on a car trailer.
It is equipped with a user-friendly plastic handle and a lever lock

druckratschen35-mmhochfester-stahlblau-verzinkt251-450-dan
71BSQ030
Pressure Ratchet 35mm - 30kN (bicolor, Plastic Handgrip)
Pressure Ratchet 35mm - 30kN (bicolor, Plastic Handgrip)Pressure Ratchet35 mmHigh tensile steelRAL colour30 kN (3,000 daN)270 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet with Lever lock for 35 mm webbing.
RAL9005 (black)
Handgrip: wide, plastic

druckratschen35-mmhochfester-stahlral-farbe251-450-dan
71BQ033
Pressure Ratchet 35mm - 30kN (STF 330 daN)
Pressure Ratchet 35mm - 30kN (STF 330 daN)Pressure Ratchet35 mmHigh tensile steelBlue Chromated30 kN (3,000 daN)330 daN

Soon available again.

Pressure ratchet with lever safety catch for 35 mm tensioning strap with an STF value of 330 daN.

Discover our latest 35 mm pressure ratchet.
Developed to revolutionise the securing of cars on vans! Our 35 mm pressure ratchet is based on a thorough development and offers safety for the transport of vehicles.
With a secured STF value of 330 daN, our pressure ratchet is designed to ensure maximum safety even under extreme conditions. The ratchet has been tested in accordance with the specifications of DIN EN 12195-2 – for absolute reliability and quality. Rely on our pressure ratchet to securely and safely fasten your cars to the transporter. It is a reliable solution for a trouble-free and safe transport experience.
Your safety is our top priority!
Move with the future of car securing – with our 71BQ033 pressure ratchet!

VDI Guideline 2700 Sheet 1 – “Load securing on road vehicles”
This guideline provides guidelines and recommendations for the safe securing of loads during transport on road vehicles. Here are some key aspects that can be covered in the guideline:
Objective: the aim of the guideline is to ensure road safety by providing guidance on the correct securing of loads on vehicles. This is important to prevent accidents that could be caused by unsecured or improperly secured loads.
Responsibilities: The guideline could encourage the various parties in the transport process (such as the shipper, carrier, driver, etc.) to take on certain responsibilities in relation to load securing.
Calculation of securing forces: Methods and formulas can be provided to calculate the required securing forces for the different types of cargo and means of transport.
Securing equipment: The guideline could provide recommendations for suitable securing equipment such as lashing straps, anti-slip mats or other aids to effectively secure the load.
Testing and documentation: Instructions may be included for carrying out load securing tests before and during transport and for documenting the securing measures carried out.

druckratschen35-mmhochfester-stahlblau-verzinkt251-450-dan
71BX031
Pressure Ratchet 35mm - 30kN (Inox)
Pressure Ratchet 35mm - 30kN (Inox)Pressure Ratchet35 mmInox30 kN (3,000 daN)180 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet with Lever lock, for 35 mm webbing.
Handgrip: wide, Inox

druckratschen35-mmedelstahl101-250-dan
74BQ000
Pressure Ratchet 35mm - 30kN (wide, J-Hook)
Pressure Ratchet 35mm - 30kN (wide, J-Hook)Pressure Ratchet35 mmHigh tensile steelBlue Chromated30 kN (3,000 daN)270 daN

The article is available on request.

Pressure ratchet with Lever lock for 35 mm webbing.
J-Hook / Finger hook: mounted

Set:

druckratschen35-mmhochfester-stahlblau-verzinkt251-450-dan
74BQ002
Pressure Ratchet 35mm - 30kN (narrow, Swivel Hook)
Pressure Ratchet 35mm - 30kN (narrow, Swivel Hook)Pressure Ratchet35 mmHigh tensile steelBlue Chromated30 kN (3,000 daN)270 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet with Lever lock for 35 mm webbing.
Handgrip: plastic, narrow version
Swivel J-Hook: mounted

druckratschen35-mmhochfester-stahlblau-verzinkt251-450-dan
74BQ003
Pressure Ratchet 35mm - 30kN (narrow, J-Hook)
Pressure Ratchet 35mm - 30kN (narrow, J-Hook)Pressure Ratchet35 mmHigh tensile steelBlue Chromated30 kN (3,000 daN)270 daN

The article is available on request.

Pressure ratchet with Lever lock for 35 mm webbing.
J-Hook / Double finger hook: mounted

Handgrip: narrow, steel

Set:

druckratschen35-mmhochfester-stahlblau-verzinkt251-450-dan
74BQ004
Pressure Ratchet 35mm - 30kN (wide, Swivel Hook)
Pressure Ratchet 35mm - 30kN (wide, Swivel Hook)Pressure Ratchet35 mmHigh tensile steelBlue Chromated30 kN (3,000 daN)270 daN

The article is available on request.

Pressure ratchet with Lever lock for 35 mm webbing.
Swivel J-Hook: mounted

Set:

druckratschen35-mmhochfester-stahlblau-verzinkt251-450-dan
74BQ005
Pressure Ratchet 35mm - 30kN (wide, Swivel Hook long)
Pressure Ratchet 35mm - 30kN (wide, Swivel Hook long)Pressure Ratchet35 mmHigh tensile steelBlue Chromated30 kN (3,000 daN)270 daN

The article is available on request.

Pressure ratchet with Lever lock for 35 mm webbing. Swivel J-Hook: mounted Set: Swivel J-Hook (long) 35mm – 30kN Pressure Ratchet 35mm – 30kN

druckratschen35-mmhochfester-stahlblau-verzinkt251-450-dan
71CQ020
Pressure Ratchet 50mm - 20kN
Pressure Ratchet 50mm - 20kNPressure Ratchet50 mmHigh tensile steelBlue Chromated – KOsil20 kN (2,000 daN)120 daN

Soon available again.

Pressure ratchet for 50 mm Lashing belt.
Handgrip: wide, steel

Short pressure ratchet, with a length of 134 mm it is one of the smallest in our delivery program in the range of 50 mm webbing.

druckratschen50-mmhochfester-stahlblau-verzinkt-kosil101-250-dan
71CX020
Pressure Ratchet 50mm - 20kN (Inox)
Pressure Ratchet 50mm - 20kN (Inox)Pressure Ratchet50 mmInox20 kN (2,000 daN)200 daN

Usually ready for shipment in 1 to 3 working days.

Stainless steel pressure ratchet in a short version for 50 mm lashing straps.
Ratchet handle: stainless steel, wide version

druckratschen50-mmedelstahl101-250-dan
71CX035
Pressure Ratchet 50mm - 40kN (Inox)
Pressure Ratchet 50mm - 40kN (Inox)Pressure Ratchet50 mmInox40 kN (4,000 daN)240 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet with Lever lock for 50 mm webbing.

druckratschen50-mmedelstahl101-250-dan
72CQ050
Pressure ratchet body 50mm - 50kN
Pressure ratchet body 50mm - 50kNPressure Ratchet50 mmHigh tensile steelBlue Chromated50 kN (5,000 daN)

The article is available on request.

Pressure ratchet body for 50 mm Lashing belt, with hexagon (SW28) socket.

Pressure ratchet body / pressure ratchet without operating lever with hexagonal socket (SW28) as drive, for 50 mm lashing strap.

druckratschen50-mmhochfester-stahlblau-verzinkt40-100-dan
71CQ050
Pressure Ratchet 50mm - 50kN (188mm)
Pressure Ratchet 50mm - 50kN (188mm)Pressure Ratchet50 mmHigh tensile steelBlue Chromated – KOsil50 kN (5,000 daN)300 daN

Usually ready for shipment in 1 to 3 working days.

The one with the red handle – our standard pressure ratchet with lever lock for 50 mm lashing strap.
Handle design: plastic, red
Lever length: 188 mm

Our standard pressure ratchet 71CQ050 is used on a truck or van. In connection with belt strap and end fittings, it secures your load against slipping and holds it in the intended place on the loading area.

druckratschen50-mmhochfester-stahlblau-verzinkt-kosil251-450-dan
71CQ052
Pressure ratchet 50mm - 50kN (190mm)
Pressure ratchet 50mm - 50kN (190mm)Pressure Ratchet50 mmHigh tensile steelBlue Chromated50 kN (5,000 daN)250 daN

The article is available on request.

Pressure ratchet with lever safety device for 50 mm lashing strap.
Handle design: black plastic
Lever length: 190 mm

Pressure ratchet 71CQ052 with rubberized operating parts (lever, lever lock).
With webbing and end fittings, it secures your load against slipping and keeps it in the intended place on the loading area.

druckratschen50-mmhochfester-stahlblau-verzinkt101-250-dan
71CQ059
Pressure Ratchet 50mm - 50kN (213mm)
Pressure Ratchet 50mm - 50kN (213mm)Pressure Ratchet50 mmHigh tensile steelBlue Chromated – KOsil50 kN (5,000 daN)350 daN

Usually ready for shipment in 1 to 3 working days.

NEW – the one with the red handle, our pressure ratchet for 50 mm lashing strap.
Special feature: higher STF value than the standard pressure ratchet.
Handle design: plastic, red
Lever length: 213 mm

With the red handle – Our new pressure ratchet 71CQ059 with higher STF value.
Used on a truck or van. In conjunction with webbing and end fittings, it secures your load against slipping and holds it in the intended place on the loading area.

druckratschen50-mmhochfester-stahlblau-verzinkt-kosil251-450-dan
71CSQ051
ABS-Pressure Ratchet 50mm - 50kN (bicolor)
ABS-Pressure Ratchet 50mm - 50kN (bicolor)Pressure Ratchet50 mmHigh tensile steelRAL colour50 kN (5,000 daN)350 daN

Usually ready for shipment in 1 to 3 working days.

ABS-Pressure ratchet with Lever lock for 50 mm webbing.
RAL9005 (black)
ABS function – Active Brake System, allows controlled release of preload force.

Why ABS for a pressure ratchet?
Safety comes first. When transporting goods, your secured load can still ‘settle’ or move a little. This is why the load can suddenly start to move uncontrollably when released with a normal pressure or long lever ratchet and possibly cause an accident.
This situation can be prevented with an ABS pressure ratchet (Active Brake System).
An ABS ratchet allows you to release the tension in small steps so that you can react better to a potential problem.

druckratschen50-mmhochfester-stahlral-farbe251-450-dan
71CQ057
Pressure Ratchet 50mm - 50kN (309mm)
Pressure Ratchet 50mm - 50kN (309mm)Pressure Ratchet50 mmHigh tensile steelBlue Chromated – KOsil50 kN (5,000 daN)450 daN

Usually ready for shipment in 1 to 3 working days.

Long lever-Pressure ratchet with Lever lock for 50 mm webbing.
Toothing: double

In cargo securing, a long lever ratchet refers to a special tool used to tighten cargo on transport vehicles such as trucks, trailers or ships. This tool is used to tighten tension belts or lashing straps with high tension in order to securely fix and secure the cargo during transportation.

A long lever ratchet in cargo securing has a long lever arm that allows the operator to apply a significant tensioning force to the straps. It usually consists of a handle, a long lever and a mechanism that generates the tensioning force. The operator applies the ratchet to the lashing strap and uses the lever to tighten the straps. This allows the load to be securely held in place to prevent slipping or tipping over during transport.

Long lever pressure ratchets are particularly useful when transporting heavy loads or delicate goods where secure fixation and tensioning of the belts is critical. They are often used in the logistics and transport industry to ensure the safety of the load during transport and prevent accidents or damage.

druckratschen50-mmhochfester-stahlblau-verzinkt-kosil251-450-dan
71CSQ050
Pressure Ratchet 50mm - 50kN (bicolor)
Pressure Ratchet 50mm - 50kN (bicolor)Pressure Ratchet50 mmHigh tensile steelRAL colour50 kN (5,000 daN)300 daN

Soon available again.

Pressure ratchet with Lever lock for 50 mm webbing.
RAL9005 (black)

druckratschen50-mmhochfester-stahlral-farbe251-450-dan
71CQ055
Pressure Ratchet 50mm - 50kN (170mm)
Pressure Ratchet 50mm - 50kN (170mm)Pressure Ratchet50 mmHigh tensile steelBlue Chromated50 kN (5,000 daN)200 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet with Lever lock for 50 mm webbing.
Handgrip: narrow, plastic

druckratschen50-mmhochfester-stahlblau-verzinkt101-250-dan
71CQ100
Pressure Ratchet 50mm - 50kN (FLS)
Pressure Ratchet 50mm - 50kN (FLS)Pressure Ratchet50 mmHigh tensile steelBlue Chromated50 kN (5,000 daN)300 daN

The article is available on request.

Pressure ratchet FLS with Lever lock for 50 mm webbing.
FLS – fast load securing

druckratschen50-mmhochfester-stahlblau-verzinkt251-450-dan
71BQ064
Geared Pull Ratchet 35mm - 30kN (ERGO)
Geared Pull Ratchet 35mm - 30kN (ERGO)ERGO Ratchet35 mmHigh tensile steelBlue Chromated30 kN (3,000 daN)500 daN

Usually ready for shipment in 1 to 3 working days.

Geared pull ratchet with Lever lock for 35 mm webbing.
Handgrip: wide, Plastic

35 mm pull ratchet with built-in gearbox for high preload forces. Depending on the lashing belt, STF values of 500 daN can be achieved with ease.

The higher the pre-tensioning force the better the load securing, very high STF values are often required for load securing, our 35 mm ERGO ratchet is therefore equipped with a gearbox.
By means of the gear ratio you can achieve much higher pre-tensioning forces with this ERGO gear ratchet than with a usual ratchet.

ERGO gear ratchet (71BQ064) has a lever lock and is designed for 35 mm lashing straps.

zugratschen35-mmhochfester-stahlblau-verzinkt451-900-dan
71CQ060
Pull Ratchet 50mm - 50kN (ERGO, 260mm)
Pull Ratchet 50mm - 50kN (ERGO, 260mm)ERGO Ratchet50 mmHigh tensile steelBlue Chromated – KOsil50 kN (5,000 daN)500 daN

Soon available again.

Pull ratchet ERGO with Lever lock for 50 mm webbing. Handle length: 260 mm Handgrip: wide, plastic (red)

With the red handle.
Our standard ERGO pull ratchet 71CQ060 finds its use on a truck or van. In combination with webbing and end fittings, it secures your load against slipping and keeps it in the intended place on the loading area. With a lever length of 260 mm, the operation of the long lever ratchet is easier in contrast to a pressure ratchet and a much higher pretensioning force / STF value is achieved.

zugratschen50-mmhochfester-stahlblau-verzinkt-kosil451-900-dan
71CQ067
Pull Ratchet 50mm - 50kN (ERGO, 300mm)
Pull Ratchet 50mm - 50kN (ERGO, 300mm)ERGO Ratchet50 mmHigh tensile steelBlue Chromated – KOsil50 kN (5,000 daN)500 daN

The article is available on request.

Long lever Pull ratchet ERGO with Lever lock for 50 mm webbing.
Handle length: 300 mm
Handgrip: PE, red

One of the common clamping elements for heavy goods is a pull ratchet, this is also called ERGO ratchet. In contrast to a push ratchet / short lever ratchet, this is more ergonomic for the user. When lashing and tensioning, the lever, as the name of the ratchet already says, is pulled (down) and not pressed, this protects the spine of the user. Another advantage is that higher pretensioning forces – STF (Standard Tension Force) can be achieved here when securing the load.

zugratschen50-mmhochfester-stahlblau-verzinkt-kosil451-900-dan
71CQ068
71CQ068-Ergo-Langhegel-Zugratsche
Pull Ratchet 50mm - 50kN (ERGO, 340mm)ERGO Ratchet50 mmHigh tensile steelBlue Chromated – KOsil50 kN (5,000 daN)500 daN

The article is available on request.

Long lever Pull ratchet ERGO with Lever lock for 50 mm webbing.
Handle length: 340 mm
Handgrip: PE, red

An “ergo ratchet for load securing” is a special type of ratchet designed for securing cargo on trucks, trailers or other means of transport. These ratchets are designed to tighten tie-down straps or lashing straps to ensure that the transported load remains secure and stable during transportation.
In general, ERGO ratchets for load securing are designed to be easily and efficiently used by operators. They often feature longer handles that allow for comfortable handling to ease the process of pulling and tightening the straps. This can help reduce operator strain and fatigue during the load securing process.
The use of ergonomic ratchets for load securing is important to ensure safety on the road and to ensure that the load does not slip or become damaged during transport. These ratchets are available in various sizes and designs to meet different load securing requirements.

zugratschen50-mmhochfester-stahlblau-verzinkt-kosil451-900-dan
71CQ063
ABS-Pull Ratchet 50mm – 50kN (ERGO)
ABS-Pull Ratchet 50mm – 50kN (ERGO)ERGO Ratchet50 mmHigh tensile steelBlue Chromated – KOsil50 kN (5,000 daN)450 daN

The article is available on request.

ABS-ERGO pull ratchet with lever lock for 50 mm lashing strap.
Handle design: wide, steel
Active Brake System (ABS): enables controlled release of the pre-tensioning force.

Why ABS? It’s as simple as it is obvious.
It’s about your safety, because when transporting goods, your secured load can still ‘settle’ or move a little. Therefore, the load can suddenly start to move uncontrollably when released with a normal pressure or long lever ratchet and possibly cause an accident.
This situation can be prevented with an ABS (Active Brake System) towing ratchet.
An ABS-ERGO long-lever ratchet allows you to release the tension in small steps so that you can react better to a potential problem.
Our ABS tension ratchets are tested in accordance with DIN EN 12195-2 for the prescribed lashing capacity (LC) and breaking load (BL).

zugratschen50-mmhochfester-stahlblau-verzinkt-kosil251-450-dan
71CSQ063
ABS-Pull Ratchet 50mm – 50kN (ERGO, bicolor black)
ABS-Pull Ratchet 50mm – 50kN (ERGO, bicolor black)ERGO Ratchet50 mmHigh tensile steelRAL colour50 kN (5,000 daN)450 daN

Usually ready for shipment in 1 to 3 working days.

ABS-ERGO Pull ratchet with Lever lock for 50 mm webbing.
RAL9005 (black)
Handgrip: wide, steel
ABS function – Active Brake System, allows controlled release of preload force.

Why ABS? It’s as simple as it is obvious.
It’s about your safety, because when transporting goods, your secured load can still ‘settle’ or move a little. This is why the load can suddenly start to move uncontrollably when released with a normal pressure or ERGO long lever ratchet and possibly cause an accident.
This situation can be prevented with an ABS (Active Brake System) towing ratchet.
An ERGO ABS long-lever ratchet allows you to release the tension in small steps so that you can react better to a potential problem.
Our ABS-EGRO ratchets are tested in accordance with DIN EN 12195-2 for the prescribed lashing capacity (LC) and breaking load (BL).

zugratschen50-mmhochfester-stahlral-farbe251-450-dan
71CQ064
Geared Pull Ratchet 50mm - 50kN (ERGO)
Geared Pull Ratchet 50mm - 50kN (ERGO)ERGO Ratchet50 mmHigh tensile steelBlue Chromated50 kN (5,000 daN)800 daN

Usually ready for shipment in 1 to 3 working days.

Geared pull ratchet with Lever lock for 50 mm webbing.
Handgrip: wide, Plastic

50 mm pull ratchet with built-in gearbox for high preload forces. Depending on the lashing belt, STF values of 800 daN can be achieved with ease.

The decisive factor for good load securing is the pretensioning force to be achieved, depending on the application, very high STF values are required for load securing, our ERGO long lever ratchet is equipped with a gearbox.
Due to the gear ratio, you can achieve much higher STF values with this ERGO gear ratchet than with a usual ERGO long lever pull ratchet at the pre-tensioning force. Our ERGO gear ratchet (71CQ064) has a lever lock and is designed for 50 mm lashing straps.

zugratschen50-mmhochfester-stahlblau-verzinkt451-900-dan
74CQ000
Pressure Ratchet 50mm - 50kN (alu, Swivel Hook Set)
Pressure Ratchet 50mm - 50kN (alu, Swivel Hook Set)Pressure Ratchet50 mmHigh tensile steelBlue Chromated50 kN (5,000 daN)200 daN

Soon available again.

Pressure ratchet with Lever lock for 50 mm webbing.
Swivel Hook: mounted
Handgrip: Aluminium

Set:

druckratschen50-mmhochfester-stahlblau-verzinkt101-250-dan
74CQ001
Pressure Ratchet 50mm - 50kN (Swivel Hook Set)
Pressure Ratchet 50mm - 50kN (Swivel Hook Set)Pressure Ratchet50 mmHigh tensile steelBlue Chromated – KOsil50 kN (5,000 daN)300 daN

Usually ready for shipment in 1 to 3 working days.

Pressure ratchet set with lever safety device for 50 mm lashing strap
Swivel hook: mounted

Set:

druckratschen50-mmhochfester-stahlblau-verzinkt-kosil251-450-dan
74CQ002
Pressure Ratchet 50mm - 50kN (J-Hook Set)
Pressure Ratchet 50mm - 50kN (J-Hook Set)Pressure Ratchet50 mmHigh tensile steelBlue Chromated – KOsil50 kN (5,000 daN)300 daN

The article is available on request.

Pressure ratchet set with Lever lock for 50 mm webbing.
J-Hook / Finger hook: mounted

Set:

druckratschen50-mmhochfester-stahlblau-verzinkt-kosil251-450-dan
74CQ003
ABS-Pressure Ratchet 50mm – 50kN (J-Hook Set)
ABS-Pressure Ratchet 50mm – 50kN (J-Hook Set)Pressure Ratchet50 mmHigh tensile steelHDPD - black50 kN (5,000 daN)350 daN

The article is available on request.

ABS-Pressure ratchet set with Lever lock for 50 mm webbing.
J-Hook / Finger hook: mounted

druckratschen50-mmhochfester-stahlhdpd-schwarz251-450-dan
74CQ004
Pressure ratchet 50mm - 50kN (Swivel hook Set)
Pressure ratchet 50mm - 50kN (Swivel hook Set)Pressure Ratchet50 mmHigh tensile steelBlue Chromated50 kN (5,000 daN)250 daN

The article is available on request.

Pressure ratchet – set with rubberized handle and lever lock for 50 mm lashing strap
Swivel hook: mounted

Set:

Discover our pressure ratchet with an integrated swivel hook – the perfect solution for effortless tensioning of 50 mm webbing! With a breaking load of 50 kN, our pressure ratchet is reliable and safe, even under extreme conditions.
The rubberised handle and lever lock make operating the ratchet child’s play. Tensioning belts has never been so convenient. The high-quality workmanship ensures a long service life and maximum performance.
Our pressure ratchet with swivel hook is your reliable partner for safe and easy tensioning.

druckratschen50-mmhochfester-stahlblau-verzinkt101-250-dan
71DQ101
Heavy Duty Pressure ratchet 75mm - 100kN
Heavy Duty Pressure ratchet 75mm - 100kNPressure Ratchet75 mmHigh tensile steelBlue Chromated – KOsil100 kN (10,000 daN)

Usually ready for shipment in 1 to 3 working days.

Heavy Duty Pressure ratchet without Lever lock for 75 mm webbing.

Heavy-duty pressure ratchets are not suitable for tie-down lashing, they are used exclusively for direct lashing and the STF value is not shown on the lashing strap label.

druckratschen75-mmhochfester-stahlblau-verzinkt-kosil186
71DX101
Heavy Duty Pressure Ratchet 75mm - 70kN (Inox)
Heavy Duty Pressure Ratchet 75mm - 70kN (Inox)Pressure Ratchet75 mmInox70 kN (7,000 daN)

The article is available on request.

Stainless steel pressure ratchet ensures the securing of heavy loads.
To be used load securing straps with a width of 75 mm.

Heavy-duty pressure ratchets are not suitable for tie-down lashing, they are used exclusively for direct lashing and the STF value is not shown on the lashing strap label.

druckratschen75-mmedelstahl186
71DQ064
Geared Pull Ratchet 75mm - 100kN (ERGO)
Geared Pull Ratchet 75mm - 100kN (ERGO)ERGO Ratchet75 mmHigh tensile steelBlue Chromated100 kN (10,000 daN)500 daN

Usually ready for shipment in 1 to 3 working days.

75mm gear pull ratchet with built-in gear for high pretensioning forces. Depending on the lashing strap, STF values of 500 daN are easily achieved.
Handle design: wide, plastic

The decisive factor for good load securing is the pretensioning force to be achieved, depending on the application, very high STF values are required for load securing, our ERGO long lever pull ratchet is equipped with a gear.
Due to the gear ratio, you can achieve much higher STF values with this ERGO gear ratchet than with a usual ERGO long lever pull ratchet at the pre-tensioning force. Our ERGO gear ratchet (71DQ064) has a lever lock and is designed for 75 mm lashing straps.

zugratschen75-mmhochfester-stahlblau-verzinkt451-900-dan
71DQ102
Tree trunk press / HD Pressure ratchet 75mm - 100kN
Tree trunk press / HD Pressure ratchet 75mm - 100kNPressure Ratchet75 mmHigh tensile steelBlue Chromated100 kN (10,000 daN)

The article is available on request.

Tree trunk press / Heavy Duty Pressure ratchet for 75 mm webing.
With opening for Handle 71DQ103.

A tree trunk press equipped with a 75 mm wide tensioning belt is used for securing tree trunks. It prevents tearing during felling or further processing. The log press is placed above the cut and always opposite the felling notch.

druckratschen75-mmhochfester-stahlblau-verzinkt40-100-dan
71DQ500
Heavy Duty Pressure ratchet 100mm - 100kN
Heavy Duty Pressure ratchet 100mm - 100kNPressure Ratchet100 mmHigh tensile steelBlue Chromated100 kN (10,000 daN)

The article is available on request.

Heavy duty pressure ratchet for 100 mm lashing straps – steel version

A heavy-duty pressure ratchet is a tool used to secure and tension heavy loads. It consists of a ratchet mechanism, which is driven by a lever, and a stop shoe, which is pressed against the load. It allows loads to be secured and tensioned with great force.
The process of using a heavy duty compression ratchet is as follows:
1. position the heavy duty pressure ratchet at the desired location.
2. operate the lever to actuate the ratchet mechanism and secure the load.
3. when the desired tensioning force is reached, close the lever and the load will remain securely held.
4. to release the tension, open the lever to release the ratchet mechanism.
It is important to note that the maximum tensioning force that can be applied to the heavy duty ratchet depends on the type and size of the heavy duty ratchet. It is therefore important to follow the manufacturer’s instructions and ensure that it is suitable for the intended application.

druckratschen100-mmhochfester-stahlblau-verzinkt40-100-dan

The primary objective of securing cargo is to effectively eliminate any risk to persons, animals and property under normal traffic conditions. These normal conditions include not only everyday driving situations, but also take into account sudden emergency braking, unexpected evasive maneuvers, such as forced lane changes, and uneven road surfaces. Konnex products for tie-downs meet all the requirements of DIN EN 12195-2. Konnex products are designed exclusively for securely lashing loads – never for lifting loads!