Cam Buckles

Cam Buckles

Securing the load with a cam buckle .. Here the loose end of the lashing strap is pulled into the cam buckle, while the strap is pressed and held by the spring-loaded and toothed lever on the opposite clamp bar. In order to secure the load, all that remains to be done is to tighten the belt strap; the tension is achieved by pulling the belt strap by hand. Our cam buckles are divided into different areas. Depending on the application, you can choose between different webbing widths of 12, 18, 25, 35 and 50 mm and breaking loads of up to 1,400 daN. In our delivery program, we offer cam buckles made of die-cast zinc, steel and stainless steel. These are particularly suitable for securing light loads such as: bundling or strapping roof loads.

Article nrImageNameWebbing widthMaterialFinishingBreaking Strength (BS)StockSummaryDescriptionhf:att:pa_gurtbreitehf:att:pa_materialhf:att:pa_oberflaechehf:att:pa_bruchlast
70FP019
Cam buckle 12mm - 1.0kN
Cam buckle 12mm - 1.0kN12 mmZamak (ZP0410)Blue Chromated1.0 kN (100 daN)

Usually ready for shipment in 1 to 3 working days.

Zinc die-cast cam buckle for indoor and outdoor use, suitable for 12 mm tension band.

70FP019 is our smallest cam buckle. It is made of die-cast zinc and is designed for webbing widths of up to 12 mm. At 0.011 kg, it is a lightweight among the cam buckles.12-mmzamakblau-verzinkt100-dan-bs
70EP020
Cam buckle 20mm - 2.0kN
Cam buckle 20mm - 2.0kN20 mmZamak (ZP0410)Blanc2.0 kN (200 daN)

Usually ready for shipment in 1 to 3 working days.

Cam buckle for 20 mm Lashing.

20-mmzamakblank200-dan-bs
70ES020
Cam buckle 20mm - 2.0kN (black)
Cam buckle 20mm - 2.0kN (black)20 mmZamak (ZP0410)Cathodic dip coating (KTL) black2.0 kN (200 daN)

The article is available on request.

Black Cam buckle for 20 mm strap

20-mmzamakktl-beschichtet-schwarz200-dan-bs
70AP025
Cam buckle Dualsafe 25mm - 2.5kN
Cam buckle Dualsafe 25mm - 2.5kN25 mmZamak (ZP0410)Blanc2.5 kN (250 daN)

Usually ready for shipment in 1 to 3 working days.

Dualsafe – Cam buckle for 25 mm lashing.
Two springs for better clamping force / holding force.
Other color versions on request.

Our cam buckles from the series Dualsafe are a further development of a commercial clamp buckle.
We have extended this with another spring, the advantage: the clamping lever presses evenly on the webbing over the entire width. These clamp buckles offer you a very good price/performance ratio. Please ask for our pallet offers.
Other versions:
70AG025 – Cam buckle Dualsafe 25mm – 2,5kN (olive green)
70AS025 – Cam buckle Dualsafe 25mm – 2,5kN (black)

All our 25mm Cam buckles with a Breaking Strength of 2.5kN:

25-mmzamakblank250-dan-bs
70AS025
Cam buckle Dualsafe 25mm - 2.5kN (black)
Cam buckle Dualsafe 25mm - 2.5kN (black)25 mmZamak (ZP0410)RAL colour2.5 kN (250 daN)

Soon available again.

Cam buckle Dualsafe for 25 mm Lashing.
Cathodic dip coating (KTL) – RAL9005 (black)

The cam buckle 70AS025 is based on the article 70AP025. The cathodic dip coating (KTL) in the color RAL9005 (black) gives the article not only a better appearance, but also a more resistant surface. Upon customer request, we offer other RAL colors.

All our 25mm Cam buckles with a Breaking Strength of 2.5kN:

25-mmzamakral-farbe250-dan-bs
70AP030
Double Cam buckle 25mm - 2.5kN
Double Cam buckle 25mm - 2.5kN25 mmZamak (ZP0410)Blanc2.5 kN (250 daN)

Soon available again.

Double Cam buckle for 25 mm Lashing.

Load securing with a dual cam buckle: here, the loose ends of the webbing are each pulled past the clamping lever, tensioned by hand to an open end and fixed in place by the clamping levers installed in the dual cam buckle. In contrast to compression and tension ratchets, low pretensioning forces are achieved with a load securing system: dual cam buckle with lashing strap.

All our 25mm Cam buckles with a Breaking Strength of 2.5kN:

25-mmzamakblank250-dan-bs
70AP060
Cam buckle 25mm - 4.5kN
Cam buckle 25mm - 4.5kN25 mmZamak (ZP0410)Blue Chromated4.5 kN (450 daN)

Usually ready for shipment in 1 to 3 working days.

Cam buckle for 25 mm Lashing.

Cam buckle made from high-quality galvanised die-cast zinc. Developed for high demands, this cam buckle is the ideal solution for a wide range of applications. Designed for a 25 mm wide webbing strap, it not only offers an optimum fit, but also a high level of safety.
The breaking strength of 450 daN makes our buckle reliable and robust in any situation. Whether you use it for professional equipment, outdoor activities or everyday use.

We also carry this zinc die-cast cam buckle as a stainless steel cam buckle in our program:

25-mmzamakblau-verzinkt450-dan-bs
70AX045
Cam buckle 25mm - 4.5kN (Inox)
Cam buckle 25mm - 4.5kN (Inox)25 mmInox4.5 kN (450 daN)

Usually ready for shipment in 1 to 3 working days.

Stainless steel Cam buckle for 25 mm Lashing.

We also have this stainless steel cam buckle in our program as a zinc die-cast cam buckle:

25-mmedelstahl450-dan-bs
70AP050
Cam buckle Dualsafe 25mm - 5.0kN
Cam buckle Dualsafe 25mm - 5.0kN25 mmZamak (ZP0410)Blanc5.0 kN (500 daN)

Usually ready for shipment in 1 to 3 working days.

Dualsafe – Cam buckle for 25 mm lashing.
Two springs for better clamping force / holding force.
Other color versions on request.

Our Dualsafe cam buckles, Made by KONNEX are a further development of a cam buckle for 25 mm wide straps. We have improved the pressure point on the webbing by means of a second spring. The advantage is that the clamping lever presses evenly on the tension strap over the entire width.
This cam buckle lock offers you a very good price/performance ratio. Please ask for our pallet offers.
Other versions:
70AF050 – Cam buckle Dualsafe 25mm – 5,0kN (red)
70AS050 – Cam buckle Dualsafe 25mm – 5,0kN (black)
We will be pleased to submit you an offer for this also as a chrome-plated or nickel-plated version.

25-mmzamakblank500-dan-bs
70AS050
Cam buckle Dualsafe 25mm - 5.0kN (black)
Cam buckle Dualsafe 25mm - 5.0kN (black)25 mmZamak (ZP0410)RAL colour5.0 kN (500 daN)

Usually ready for shipment in 1 to 3 working days.

Cam buckle Dualsafe for 25 mm Lashing.
Cathodic dip coating (KTL) – RAL 9005 (black)

If a cam buckle in a special color is required, then you have come to the right place. We are happy to coat according to your wishes, such as the Dualsafe cam buckle shown here. We have provided this with a cathodic dip coating RAL9005 (cathodic dip coating, black). This surface protection not only gives the article a better appearance, but also a more resistant surface. On customer request even with your company logo.

25-mmzamakral-farbe500-dan-bs
70AQ075
Cam buckle 25mm - 10kN
Cam buckle 25mm - 10kN25 mmHigh tensile steelBlue Chromated10 kN (1,000 daN)

Usually ready for shipment in 1 to 3 working days.

Cam buckle for 25 mm Lashing.

Cam buckle body: Galvanized steel
Cam buckle handle: Zinc die-casting

25-mmhochfester-stahlblau-verzinkt1000-dan-bs
70AQ080
Cam buckle 25mm - 8.0kN
Cam buckle 25mm - 8.0kN25 mmZamak (ZP0410)Blue Chromated8.0 kN (800 daN)

The article is available on request.

Zinc die-cast cam buckle for 25 mm Lashing.

A clamp buckle plays an important role in securing loads, especially when transporting goods on vehicles such as lorries, trailers or other means of transport. Load securing is crucial to prevent accidents, injuries and damage. The clamp buckle is an element used in this context to securely fix cargo.

Here are some specific functions and roles of a turnbuckle in load securing:

Fixing the load: clamp buckles are often used to fix pieces of cargo together. For example, they can be used to connect wooden beams, metal parts or other elements of the load together to prevent them from slipping or tipping over during transport.

Ease of use: Cam buckles are often designed to be easy to open and close. This facilitates the loading process and saves time while ensuring reliable securing.

Proper use of clamp buckles and other load securing devices is critical to ensure safety on the road and minimise potential hazards associated with unsecured cargo. It is important to follow local regulations and safety standards to ensure that the load meets the appropriate requirements.

25-mmzamakblau-verzinkt800-dan-bs
70BP070
Cam buckle 35mm - 8.0kN
Cam buckle 35mm - 8.0kN35 mmZamak (ZP0410)Blue Chromated8.0 kN (800 daN)

Usually ready for shipment in 1 to 3 working days.

Cam buckle for 35 mm Lashing.

The cam buckle is made of zinc die-cast (galvanized) and is suitable for indoor, but also for outdoor use.

35-mmzamakblau-verzinkt800-dan-bs
70CQ100
Cam buckle 50mm - 14kN (Heavy Duty)
Cam buckle 50mm - 14kN (Heavy Duty)50 mmHigh tensile steelBlue Chromated14 kN (1,400 daN)

Usually ready for shipment in 1 to 3 working days.

Cam buckle for 50 mm Lashing belt.

A cam buckle for heavy loads – the lever made of die-cast zinc and the housing made of high-strength steel.
Lashing possibilities with a 50 mm wide webbing strap possible. On request, we coat this cam buckle 70CQ100 in various RAL colors.

50-mmhochfester-stahlblau-verzinkt1400-dan-bs
70CSV100
Cam buckle 50mm - 14kN (black, Heavy Duty)
Cam buckle 50mm - 14kN (black, Heavy Duty)50 mmHigh tensile steelRAL colour14 kN (1,400 daN)

Usually ready for shipment in 1 to 3 working days.

Cam buckle for 50 mm Lashing belt.
Powder coated – RAL 9005 (black)

A special needs clamp lock has several features and characteristics that distinguish it from conventional clamp locks. Here are some factors and considerations that could be taken into account when selecting or designing such a clamp lock:
Material and durability: the lock should be made of high quality and durable material to withstand the special requirements.
Load capacity: the clamp lock should be able to withstand heavy loads and vibrations, depending on the requirements of the application. This could be relevant for applications in heavy industry, mining or transportation.
Temperature resistance: If the clamp lock is exposed to extreme temperatures, it should be able to withstand these conditions without compromising its function or strength.
Security: Depending on the application, additional security features might be required, such as a secure locking mechanism.
Weather resistance: If the clamp lock is used outdoors, it should be weatherproof and able to withstand the effects of rain, snow and UV radiation.
Adaptability: a special needs clamp lock should potentially be adaptable to different mounting points or configurations to meet specific needs.
Approvals and certifications: Depending on the application, special approvals or certifications could be required to ensure the lock meets applicable standards.
The specific requirements for a clamp lock will depend on the application. It is important to clarify these requirements in advance and, if necessary, work with a professional or a company that specializes in the design and manufacture of specialized locks for specific applications.

50-mmhochfester-stahlral-farbe1400-dan-bs