Usually ready for shipment in 1-3 working days (depending on stocklevel).

Zinc die-cast cam buckle for indoor and outdoor use, suitable for 12 mm tension band.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Cam buckle for 20 mm Lashing.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Dualsafe – Cam buckle for 25 mm lashing.
Two springs for better clamping force / holding force.
Other color versions on request.

Our cam buckles from the series Dualsafe are a further development of a commercial clamp buckle.
We have extended this with another spring, the advantage: the clamping lever presses evenly on the webbing over the entire width. These clamp buckles offer you a very good price/performance ratio. Please ask for our pallet offers.
Other versions:
70AG025 – Cam buckle Dualsafe 25mm – 2,5kN (olive green)
70AS025 – Cam buckle Dualsafe 25mm – 2,5kN (black)

All our 25mm Cam buckles with a Breaking Strength of 2.5kN:

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Cam buckle Dualsafe for 25 mm Lashing.
Cathodic dip coating (KTL) – RAL9005 (black)

The cam buckle 70AS025 is based on the article 70AP025. The cathodic dip coating (KTL) in the color RAL9005 (black) gives the article not only a better appearance, but also a more resistant surface. Upon customer request, we offer other RAL colors.

All our 25mm Cam buckles with a Breaking Strength of 2.5kN:

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Double Cam buckle for 25 mm Lashing.

Load securing with a dual cam buckle: here, the loose ends of the webbing are each pulled past the clamping lever, tensioned by hand to an open end and fixed in place by the clamping levers installed in the dual cam buckle. In contrast to compression and tension ratchets, low pretensioning forces are achieved with a load securing system: dual cam buckle with lashing strap.

All our 25mm Cam buckles with a Breaking Strength of 2.5kN:

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Cam buckle for 25 mm Lashing.

Cam buckle made from high-quality galvanised die-cast zinc. Developed for high demands, this cam buckle is the ideal solution for a wide range of applications. Designed for a 25 mm wide webbing strap, it not only offers an optimum fit, but also a high level of safety.
The breaking strength of 450 daN makes our buckle reliable and robust in any situation. Whether you use it for professional equipment, outdoor activities or everyday use.

We also carry this zinc die-cast cam buckle as a stainless steel cam buckle in our program:

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Stainless steel Cam buckle for 25 mm Lashing.

We also have this stainless steel cam buckle in our program as a zinc die-cast cam buckle:

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Dualsafe – Cam buckle for 25 mm lashing, with two springs for better clamping force / holding force.
Other color versions on request.

Our Dualsafe cam buckles, Made by KONNEX are a further development of a cam buckle for 25 mm wide straps. We have improved the pressure point on the webbing by means of a second spring. The advantage is that the clamping lever presses evenly on the tension strap over the entire width.
This cam buckle lock offers you a very good price/performance ratio. Please ask for our pallet offers.
Other versions:
70AF050 – Cam buckle Dualsafe 25mm – 5,0kN (red)
70AS050 – Cam buckle Dualsafe 25mm – 5,0kN (black)
We will be pleased to submit you an offer for this also as a chrome-plated or nickel-plated version.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Cam buckle Dualsafe for 25 mm Lashing.
Cathodic dip coating (KTL) – RAL 9005 (black)

If a cam buckle in a special color is required, then you have come to the right place. We are happy to coat according to your wishes, such as the Dualsafe cam buckle shown here. We have provided this with a cathodic dip coating RAL9005 (cathodic dip coating, black). This surface protection not only gives the article a better appearance, but also a more resistant surface. On customer request even with your company logo.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Cam buckle for 25 mm Lashing.

Cam buckle body: Galvanized steel
Cam buckle handle: Zinc die-casting

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Cam buckle for 35 mm Lashing.

A clamp buckle, often referred to as a tension belt clamp buckle, is a metal housing with a lever mechanism. The lever has a serrated edge that clamps the strap when it is pressed down. The strap is fed through an opening. When the strap is tightened, the lever is pressed down, causing the serrated edge to hold the strap in place. To release the strap, the lever is pressed, causing the serrated edge to release the strap. The buckle is usually made of robust metal, sometimes with plastic components, and the strap is often made of durable fabric.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Cam buckle for 50 mm Lashing belt.

A cam buckle for heavy loads – the lever made of die-cast zinc and the housing made of high-strength steel.
Lashing possibilities with a 50 mm wide webbing strap possible. On request, we coat this cam buckle 70CQ100 in various RAL colors.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Cam buckle for 50 mm Lashing belt.
Powder coated – RAL 9005 (black)

A special needs clamp lock has several features and characteristics that distinguish it from conventional clamp locks. Here are some factors and considerations that could be taken into account when selecting or designing such a clamp lock:
Material and durability: the lock should be made of high quality and durable material to withstand the special requirements.
Load capacity: the clamp lock should be able to withstand heavy loads and vibrations, depending on the requirements of the application. This could be relevant for applications in heavy industry, mining or transportation.
Temperature resistance: If the clamp lock is exposed to extreme temperatures, it should be able to withstand these conditions without compromising its function or strength.
Security: Depending on the application, additional security features might be required, such as a secure locking mechanism.
Weather resistance: If the clamp lock is used outdoors, it should be weatherproof and able to withstand the effects of rain, snow and UV radiation.
Adaptability: a special needs clamp lock should potentially be adaptable to different mounting points or configurations to meet specific needs.
Approvals and certifications: Depending on the application, special approvals or certifications could be required to ensure the lock meets applicable standards.
The specific requirements for a clamp lock will depend on the application. It is important to clarify these requirements in advance and, if necessary, work with a professional or a company that specializes in the design and manufacture of specialized locks for specific applications.