Anchoring Fittings

Anchoring Fittings

The anchoring fittings supplied by us for your load securing are made of steel or stainless steel and have a breaking strength range of 8.0 kN to 40.0 kN. You can also choose the type of execution. With Konnex anchoring fittings, you know that you are choosing the best quality. Do you have any further questions? Feel free to contact us!

Article nrImageNameMaterialFinishingBreaking Strength (BS)StockSummaryDescriptionhf:att:pa_materialhf:att:pa_oberflaechehf:att:pa_bruchlast
72FQ002
U-Bolt 35mm - 40kN (Premounted plate)
U-Bolt 35mm - 40kN (Premounted plate)High tensile steelBlue Chromated40 kN (4,000 daN)

Usually ready for shipment in 1 to 3 working days.

U-Bolt with plate and locknuts, for 35 mm webbing.
Angled 150°, Ø 12 mm

– Lashing bracket/u-bolt, 50 x 87 mm, screw connection M 12 – cranked outer width 62 mm – inner width 38 mm – Length 87 mm – 2 self-locking nuts M 12 mountedhochfester-stahlblau-verzinkt4000-dan-bs
72FQ001
D-Ring with bracket - 16kN
D-Ring with bracket - 16kNHigh tensile steelBlue Chromated16 kN (1,600 daN)

The article is available on request.

D-Ring with mounting bracket.

Large D-Ring with bracket for better load securing.
Subsequent screwing on the vehicle floor or on the vehicle walls.

hochfester-stahlblau-verzinkt1600-dan-bs
72ZQ004
Anchoring Fitting - 25kN
Anchoring Fitting - 25kNHigh tensile steelBlue Chromated25 kN (2,500 daN)

The article is available on request.

Oval Anchoring Fitting Single
Length x Width x Height: 145 x 100 x 16 mm

hochfester-stahlblau-verzinkt2500-dan-bs