Usually ready for shipment in 1-3 working days (depending on stocklevel).

With a length of 53 mm, this stainless steel pointed hook / double finger hook is designed for use that requires special requirements.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook for 25 mm Lashing.
Length: 47 mm

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook for 25 mm.
Length: 50 mm

A profile hook is a practical companion in the field of load securing, it is quickly used and is designed for bandwidth of 25 mm.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook for 35 mm Lashing.
Length: 62 mm

A j-hook or profile hook, is ideal for securing loads on a truck and van.
This profile hook is suitable for 35 mm lashing straps.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook for 35 mm Lashing.
Length: 74 mm

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook for 35 mm Lashing.
Length: 86 mm

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook for 35 mm Lashing, with Safety latch.
Length: 87 mm

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Finger hook for 35 mm Lashing.
Length: 90 mm

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook short, for 50 mm Lashing belt. Length: 74 mm

A j-hook is used in load securing to ensure a stable and secure connection between the load and the transportation surface (e.g. a truck or trailer floor). The main function of the pointed hook is to enable a fastening or lashing system by connecting it to lashing straps.
How it works:
1. fastening the lashing straps or chains: The pointed hook is attached to a stable point on the loading surface or to the load itself. It is generally used to connect lashing straps or chains to the corresponding ratchets.
2. lashing the load: By using lashing straps connected to the pointed hook, the load can be fixed and held in position. The hook itself helps to control the tension of the straps and ensure that the load does not slip during transportation.
3. preventing movement: The pointed hook helps to secure the load against lateral movement, vibrations and shocks during transportation, which is particularly important with long or heavier loads.
Advantages:
– Effective securing: the pointed hook ensures a robust connection and reduces the risk of the load slipping or coming loose during transportation.
– Simplicity and flexibility: The hook is easy to handle and can be attached to different points on the loading area as required.
– Versatility: Pointed hooks are available in various

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook short, for 50 mm Lashing belt.
Length: 74 mm

*** Very high corrosion protection due to our KOsil – passivation ***

A swivel hook or profile hook, double finger hook is ideal for securing loads in trucks and vans.
This standard swivel hook 72CQ300 is suitable for 50 mm tension webbing.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook – for 50 mm Lashing belt.
Length: 85 mm

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook for 50 mm Lashing belt, with Safety latch.
Length: 96 mm

A profile hook with a spring-loaded sheet metal trap, the use is with a 50 mm wide webbing.
The sheet metal trap ensures that the profile hook does not jump out of the lashing.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook for 50 mm Lashing belt. Length: 107 mm

J-Hook is also called a double finger hook, it can be used in many ways and is very suitable for securing loads on a truck trailer or in the van.
Our hooks are made of high quality steel and galvanized CrVI-free.
In combination with a pressure ratchet or an ERGO ratchet, these are the perfect unit to ensure safety in transportation.

More hooks for webbing dimensions from 25 mm up to 75 mm can be found in our OnlineShop.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook for 50 mm Lashing belt, with Safety latch.
Length: 110 mm

This profile hook / pointed hook – long version is equipped with a spring-loaded sheet metal latch that prevents it from jumping out. It is used with a 50 mm wide webbing strap.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Finger hook for 50 mm Lashing belt. Length: 133 mm

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Finger hook for 50 mm Lashing belt, with tube. Length: 158 mm

Single-finger profile hook for direct connection to a push or pull ratchet – as a fixed end.
Steel tube welded on

Usually ready for shipment in 1-3 working days (depending on stocklevel).

J-Hook / Double finger hook for 75 mm Lashing belt.

J-Hook are also called profile hooks and are used to attach lashing straps to lashing points or to external frame hole profiles of the vehicle.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Claw hook for 35 mm Lashing belt, open version.

Our claw hooks include a strap width of 35 mm and is used in conjunction with a pressure ratchet when securing loads.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Claw hook for 50 mm Lashing belt, open version.

Another aid in load securing is the claw hook, this end fitting is used with a two-piece lashing strap.
We have these for the following strap widths for you in the offer: 25 mm, 35 mm, 50 mm and 75 mm.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Flat hook / Pallet hook for 25 mm Lashing, with Safety device.

Flat hook with spring-loaded safety pin, this prevents loosening from a lashing rail, this is used with a width of 25 mm.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Flat hook for 25 mm Lashing, without Safety device.

A flat hook for bar lashing rails is an end fitting that is used for load securing.
Rod lashing rails are rails or rail systems that are installed in vehicles such as vans and trailers.
They are used to secure transported goods during transportation.

It is used to securely fasten tension belts to the rail.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Flat hook / Pallet hook for 50 mm Lashing belt.

Flat hook made of high-strength steel for load securing for 50 mm webbing.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Flat hook / Pallet hook for 50 mm Lashing belt.
Length: 115 mm

A flat hook or heavy profile hook has been developed for securing loads in lorries and vans.
Forged version, designed for lashing strap widths of 50 mm.

A “flat hook” in load securing could be used in various ways, depending on the type of load, the means of transport and the specific requirements. Here are some possible applications:
Connection with lashing straps: flat hooks serve as end fittings for lashing straps. These straps are placed around the load and then secured by the flat hook to hold the load in place.
Special applications: Depending on the specific requirements of the load and the transport, flat hooks may also have been developed for special applications, e.g. for transporting construction site materials or other heavy goods.
Anchor point for nets: In some cases, flat hooks are used to attach safety nets or covers over the load. These nets are used to prevent loose parts of the load from falling during transport.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Forged and galvanized triangle snap hook / load hook for 25 mm tension band.
Design: with sheet metal latch

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Forged and galvanized triangle snap hook / load hook for 25 mm tension band.
Design: with wire latch.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Load hook for 25 mm Lashing, with Safety latch.

A simple and uncomplicated form of load securing in a van is the use of a load securing net.
This is placed over the load to be secured and hooked into e.g. lashing recesses, D-ring or U-bolts by means of the snap hook sewn to the lashing strap.

The load hooks have a safety device against loosening, which is designed in the form of a sheet metal trap or a wire trap.

72AQ018 Load hook 25 mm – 25 kN (with latch)
72AQ019 Load hook 25 mm – 25 kN (with spring)

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Load hook for 25 mm Lashing, with Safety spring.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Snap hook / Flat hook for 35 mm Lashing, twisted, with Safety latch.
Length: 130 mm

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Snap hook / Flat hook for 50 mm Lashing belt, with Safety latch.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Snap hook / Flat hook for 50 mm Lashing belt, with Safety latch, twisted.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Triangle load hook for 50 mm Lashing straps, with Safety latch.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Triangle load hook for 75 mm Lashing belt, with Safety latch.
Opening: 30 mm

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Swivel Hook for 35 mm Ratchet, without bolt.
VDI 2700 Part 8.1 conform
Length: 100 mm

This swivel hook is mounted as a fixed end on a pressure ratchet.
A swivel hook is a special form of hook that is used in various applications, including load securing. The name “swivel hook” is derived from the hook’s ability to rotate or swivel on its own axis. This mechanism enables more flexible adjustment and facilitates handling in various situations.

In load securing, the swivel hook is often attached to one end of a lashing strap or lashing chain. The swivelling head of the hook offers more flexibility when attaching to different anchor points or fixing points. This can be particularly useful when the direction of the pulling angle can vary.

The advantages of a swivel hook in load securing can be

Flexibility: the swivelling head of the hook allows better adaptation to different angles and surfaces.

Reduction of twisting: The ability of the swivel hook to rotate on its own axis minimises the risk of twisting of the tensioning strap or lashing chain, which contributes to safer load securing.

Easier handling: The movable head makes it easier to attach the hook to different anchoring points, which makes the entire load securing process more efficient.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Swivel Hook for 35 mm Lashing straps, with nut and bolt.
VDI 2700 Part 8.1 conform
Length: 117 mm

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Swivel Hook for 50 mm Ratchet, without bolt. Length: 105 mm

A swivel hook is a hook that can rotate on its own axis. This rotating function prevents connected ropes, chains or belts from twisting or tangling, which is particularly important when securing loads.
1. avoidance of twisting – The ability to rotate allows the load to move to a certain extent without the lashing equipment (e.g. tension belts or chains) twisting or becoming excessively stressed.
2. even force distribution – A swivel hook ensures that the tensile forces are optimally distributed, which increases the stability of the load.
3. increased safety – less twisting means less tension on the lashing equipment, reducing the risk of material fatigue or failure.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Swivel Hook with sleeve for 50 mm Ratchet, with nut and bolt.
Length: 106 mm

Usually ready for shipment in 1-3 working days (depending on stocklevel).

S-hook, black, PVC coated.
In conjunction with a 25 mm ratchet, it is a simple way of securing a load.

Usually ready for shipment in 1-3 working days (depending on stocklevel).

Hook for 50 mm Webbing.
Endfitting with Hook for KRONE Trailers and Profi Liner.