| Webbing width | |
|---|---|
| Material | |
| Finishing | |
| Lever lock | present |
| Tested according | DIN EN 12195-2 |
| Breaking Strength (BS) | 100 kN (10,000 daN) |
| Lashing Capacity (LC) | 50 kN (5,000 daN) |
| STF-value * | 500 daN |
71DQ064
Geared Pull Ratchet 75mm – 100kN (ERGO)
75mm gear pull ratchet with built-in gear for high pretensioning forces. Depending on the lashing strap, STF values of 500 daN are easily achieved.
Handle design: wide, plastic
The decisive factor for good load securing is the pretensioning force to be achieved, depending on the application, very high STF values are required for load securing, our ERGO long lever pull ratchet is equipped with a gear.
Due to the gear ratio, you can achieve much higher STF values with this ERGO gear ratchet than with a usual ERGO long lever pull ratchet at the pre-tensioning force. Our ERGO gear ratchet (71DQ064) has a lever lock and is designed for 75 mm lashing straps.
Weight per piece: 3.25 kg
Box (8 pieces): 19.8 kg
* Important note on the STF - preload force: The STF-value we specify for pull and pressure ratchets is for guidance only.
Read more
Delivery quantity: 6 Pieces
Usually ready for shipment in 1 to 3 working days.