| Webbing width | |
|---|---|
| Material | |
| Finishing | |
| Lever lock | present |
| Tested according | DIN EN 12195-2 |
| Breaking Strength (BS) | 30 kN (3,000 daN) |
| Lashing Capacity (LC) | 15 kN (1,500 daN) |
| STF-value * | 500 daN |
71BQ064
Geared Pull Ratchet 35mm – 30kN (ERGO)
Geared pull ratchet with Lever lock for 35 mm webbing.
Handgrip: wide, Plastic
35 mm pull ratchet with built-in gearbox for high preload forces. Depending on the lashing belt, STF values of 500 daN can be achieved with ease.
The higher the pre-tensioning force the better the load securing, very high STF values are often required for load securing, our 35 mm ERGO ratchet is therefore equipped with a gearbox.
By means of the gear ratio you can achieve much higher pre-tensioning forces with this ERGO gear ratchet than with a usual ratchet.
ERGO gear ratchet (71BQ064) has a lever lock and is designed for 35 mm lashing straps.
Weight per piece: 2.19 kg,
Box (8 pieces): 18.02 kg
* Important note on the STF - preload force: The STF-value we specify for pull and pressure ratchets is for guidance only.
Read more
Delivery quantity: 10 Pieces
The article is available on request.